Best DDR3 RAM

Best DDR3 RAM

Publushed by:

Martha Davis

Last updated:

Winner: Corsair Vengeance Pro DDR3

Short summary

The Corsair Vengeance Pro DDR3 Desktop Memory Kit is one of the best DDR3 RAM kits you can get today. It does not come cheap, though. Therefore, you must be ready to allocate a considerable portion of your PC build budget.

However, because it comes from a trusted manufacturer like Corsair, you do not have to worry about the overall capacity of the desktop memory kit. Before exploring the specifications, you should know that the Corsair Vengeance Pro DDR3 Desktop Memory Kit has a limited lifetime warranty.

This DDR3 SDRAM module packs almost everything you would expect for the price. For instance, it has a trusted speed of 1600MHz, and the modules allow overclocking. However, by default, the sticks will be running at low speeds. Therefore, you may need to reset the XMP profile to get them running at the best speed possible. As for the capacity, the kit comes with four sticks of 8GB capacity. You can add them as per your performance requirements.

Everything else about the Corsair Vengeance Pro DDR3 Desktop Memory Kit is expected from a typical DDR3 RAM module. For instance, it comes with a 240-pin design and has a voltage of 1.5v, which is comparatively lower. The company has also included an Anodized Aluminum heat spreader, which makes it easy to ensure ventilation. The test latency numbers for the product are 9-9-9-24, which reflects the higher amount you pay.

While there are some quirks that you need to address, you can pick this memory kit for best-in-class speeds and overclocking-friendly performance.

Quick Facts

Pros

Cons

Recommended product
4.8/5
Corsair Vengeance Pro DDR3

Runner-up: G.Skill Ripjaws X Series DDR3

Short summary

If you think our winner pick is too expensive, you can get the G.Skill Ripjaws X Series Desktop Memory Kit. It does not cost as much as the first pick but brings you two of the best DDR3 RAM sticks you can get today. As you may have noticed, however, the total capacity of the kit is only 16GB.

Therefore, you cannot cross the higher limit. On the bright side, the product packs everything you need for overclocking your CPU and GPU for maximum results.

First things first, the G.Skill Ripjaws X Series Desktop Memory Kit comes with a maximum clock speed of a fantastic 2400MHz. Of course, you need a motherboard with full Intel XMP support to unleash its maximum power. Most users with such a PC have noticed that an upgrade to the RAM kit has improved the frame-per-second rate from popular games. You would also appreciate the build quality, which makes them relatively heavier yet classier.

While these numbers are impressive, we cannot say the same about the other aspects of the RAM kit. The kit, for example, has a tested latency of 11-13-13-31, which is not an impressive figure. Similarly, the voltage consumption is rated at 1.65V when you are running at 2400MHz. And, if you cannot overclock RAM on your motherboard, it means the stick will be running at 1333MHz. Therefore, we recommend getting the kit only if you have a compatible motherboard.

We do not think the G.Skill Ripjaws X Series Desktop Memory Kit can give you a truly seamless setup process. Yet, if you can take the extra effort, the kit would not disappoint.

One reason for the expensive price tag for the G.Skill Ripjaws X Series Desktop Memory Kit is the overclock-friendly design. It is so popular among overclocking enthusiasts that the kit has received several awards. As long as you keep track of the motherboard and the processor you work with, this memory kit would provide a seamless overclocking experience.

We must also add that the desktop memory kit looks stunning. They might as well be some of the best DDR3 memory kits you can get today. The company has managed to do so without compromising the overall build quality. Therefore, you do not have to be super-sensitive while handling the RAM modules. They can take a considerable level of wear and tear.

It seems G.Skill is quite confident about the products. It is why the G.Skill Ripjaws X Series Desktop Memory Kit comes with a lifetime warranty. All the specifications aside, you can use these DDR3 RAM modules for decades if you want to. During all this time, you can avail support from G.Skill customer care, which extends the same for overclocking-related support.

Like our winner pick, the G.Skill Ripjaws X Series Desktop Memory Kit also comes with an Aluminum-based heat spreader. As a result, you can achieve maximum cooling efficiency on the product without spending a lot. From a cost-savings point of view, it is a significant step. On the bright side, you can keep track of the temperature using Intel XMP tools.

Some customers report that installing the RAM kit to run at full speed is a tiresome task. In addition, you may have to work around the software depending on the motherboard. All in all, we think G.Skill could have simplified the method to overclock these RAM modules. And, as we said before, you may need more than 16GB size, which is expected.

Quick Facts

Pros

Cons

Recommended product
4.8/5
Corsair Vengeance Pro DDR3

Alternative: HyperX Fury Desktop Memory Kit

Short summary

We recommend the HyperX Fury 16GB Desktop Memory Kit if you are looking for less potent alternatives to the DDR3 RAM kits covered above. This product comes with a clock speed of 1600MHz, which is the overclocked figure. The base speed is 1333MHz, which can be too low for some people.

The best part is that you do not have to edit BIOS settings to enable the overclocking options.

Therefore, installing the HyperX Fury 16GB Desktop Memory Kit on your motherboard is easier than you will have imagined. On the bright side, the company offers maximum technical support and a lifetime warranty.

You do not have to be an expert to run the HyperX Fury 16GB Desktop Memory Kit at overclocked speeds. It is optimized to achieve the best speed of 1600MHz or higher when the requirements are high. So you can enjoy the feature on Intel and AMD chips alike.

The company has tested the product with popular motherboards as well. Therefore, you can install the kit on almost every motherboard you come across. This additional compatibility can be a stress-reliever for the less experienced PC builders.

Despite the superior build quality and capacity, the HyperX Fury 16GB Desktop Memory Kit could be a less powerful option for your PC. It will be the case if you want to use your PC for serious gaming, 3D modeling, or CAD.

Quick Facts

Pros

Cons

Recommended product
4.8/5
Corsair Vengeance Pro DDR3

Alternative: G.Skill Ripjaws X Series Desktop Memory

Short summary

We already listed a RAM kit from the G.Skill Ripjaws X series. However, this particular version does not cost as much as the runner-up pick. Even though you spend way less than the runner-pick, the package is pretty impressive.

For instance, the kit has a maximum clock speed of 1600MHz, which you can achieve with the help of general overclocking.

Even though the latency numbers are not so impressive, you would love the 16GB capacity RAM. It offers a lifetime warranty from the maker.

You do not have to spend a lot of money to get the G.Skill Ripjaws X Series 1600MHz Desktop Memory. It is available for a fraction of what you would pay for a premium DDR3 RAM module. In that respect alone, it could be a better choice for many people.

Even though it costs less, you can use the RAM kit for overclocking needs. In addition, it comes with built-in support for Intel XMP that you can enable in a few clicks. You can also avail some kind of customization freedom without heating the system.

As you can guess, 1600MHz maximum clock speed may not be enough for your needs. In that case, you will need an upgrade to one of the faster systems. It applies to you if you want to play high-end games using the PC.

Quick Facts

Pros

Cons

Recommended product
4.8/5
Corsair Vengeance Pro DDR3

Alternative: Kingston HyperX Fury 8GB Kit

Short summary

Here is another alternative you can explore if you need the best of cost-savings and performance. Unlike the other products from HyperX, the Kingston HyperX Fury 8GB Kit comes with a maximum clock speed of 1866MHz.

So, combined with the clock latency of 10, you can have a blast with this DDR3 RAM module when you are gaming.

Of course, you have to spend a little extra for the combined capacity of 8GB. However, compared to what the price gets you on from the DDR4 section, it is a deal you should not miss.

You can run the Kingston HyperX Fury 8GB Kit at the maximum speed without making any changes to BIOS. It comes in handy for those who want the best experience without worrying about system-level changes at any point.

Because the Kingston HyperX Fury 8GB Kit has been tested for entry-level users, you can count on the level of compatibility. The memory kit would work on most of the motherboards you can find. In addition, it supports both AMD and Intel chips.

The Kingston HyperX Fury 8GB Kit is not the most expensive choice, as you know. Considering the capacity of just 8GB, we believe you can find higher-capacity alternatives. In that case, however, you may not get the high speed of 1866MHz.

Quick Facts

Pros

Cons

DDR3 RAM FAQ

What is the fastest DDR3 RAM?

There are a number of factors that determine the swiftness of a RAM module. When it comes to DDR3 RAMs, they are the clock speed and the clock latency.

We must warn you that it is not an excellent decision to compare the speed of DDR3 RAM since these variants were introduced seven years apart. The clock rate of DDR3 RAM is set between 400MHz and 1066MHz.

However, you can easily find DDR3 RAM modules with increased clock speed. Of course, you will have to spend an additional amount to make this possible. We must also notice that the speed of a DDR3 RAM is incredible when compared to its predecessor, DDR2 SDRAM, which had its introduction in 2003. By the way, even the DDR3 RAM had different variants, such as DDR3L, which consumes less power.

If we consider the additional versions into account, G.Skill has introduced an even impressive RAM module. This module has a maximum clock speed of 4404MHz, which is no small number. However, this case requires extreme overclocking, including the use of Liquid Nitrogen. Therefore, you cannot think about using the RAM module on a conventional PC setup.

In light of all these, 1600MHz to 2666MHz would be the recommended speed range you can explore. As long as you stick to this clock speed bracket, you would not have to worry about power consumption, either. On the other hand, when combined with suitable hardware, the RAM module can assist you with the best efficiency and performance.

Is 1600MHz RAM slow?

It is one of the biggest RAM-related myths that 1600MHz RAM is slow. 1600MHz RAM modules are more than enough for most computing needs.

We are talking about basic tasks like Word processing, internet browsing, and even casual gaming. Of course, having a RAM module with a higher clock speed will improve performance at times. However, at this point, it remains optional.

Let us consider a common scenario here. You have a standard motherboard that supports only DDR3 RAM. It does not have built-in support for DDR4 RAM at this point. In that case, choosing a 1600MHz RAM module will not slow down your computer. When coupled with a competitive CPU and SSD storage, the system can provide impressive performance in versatile performance environments.

There is also a difference based on what you are comparing the DDR3 RAM with. For instance, if you compare a 1600MHz DDR3 RAM to a DDR4 RAM module with a higher clock speed, you will notice a difference indeed. However, if you compare the same DDR3 RAM with a 1866MHz DDR3 RAM, you cannot find a noticeable difference in the performance.

Long story short, you do not have to upgrade to 1866MHz RAM from 1600MHz RAM if you are expecting over-the-top performance boosts.

Can You Game on 1600MHz RAM?

Yes, you can play games on a PC equipped with 1600MHz RAM. As we mentioned in answer to the previous question, 1600MHz is not particularly slow compared to other modules in the market.

Moreover, the module can help you proceed with day-to-day computing tasks, including some level of multitasking. So, if you can arrange these resources properly, you can use 1600MHz RAM for gaming.

Of course, 1600MHz RAM alone cannot do that. Instead, your system must have access to a performance-focused CPU, GPU, and high-speed storage. In that case, having a RAM module clocked at 1600MHz will not stop you from achieving the best speed from your computer.

Many use-case studies will tell you that people use high-capacity versions of 1366MHz RAM for their gaming rigs. If we consider this, we can say with confidence that 1600MHz RAM modules are gaming-friendly.

Nevertheless, we do not recommend sticking to a 1600MHz RAM module if your budget allows for a better choice. Even if you stay within the DDR3 domain, going for a RAM module with a higher clock speed will notice an improvement in the overall performance. You do not want to give up these benefits if you would like to play resource-intensive AAA titles.

Why Is DDR3 Still Expensive?

In the grand scheme of things, DDR3 RAM modules are less expensive than DDR4 RAM modules. However, it may not always be the case when purchasing single modules from markets.

Considering that DDR3 RAM modules were introduced as early as 2007, they are still expensive in 2021. There are a few reasons why it happens. Most of them have to deal with how these modules are manufactured.

It is worth noting that DDR3 RAM modules are not produced in bulk when compared to DDR4 RAMs. So, you may have trouble finding a DDR3 RAM module with the right frequency. It puts customers in a position where they are willing to spend more. Due to the supply-cycle demand, it results in the DDR3 RAM modules being priced quite expensively.

There is also the fact that companies have refocused on producing as many DDR4 RAM modules as possible. However, the demand for DDR3 RAM modules is not proportional to the growth of DDR3. Therefore, even when companies develop powerful DDR4 RAM modules, a considerable part of the community needs a regular supply of DDR3 RAM modules.

So, in the end, you have to pay extra than you would think for a DDR3 RAM module.

Conclusion

What do you think about our coverage of the best DDR3 RAM options in the market?

We have tried to bring together RAM modules that are suitable for different needs. For instance, you can find RAM modules made for gaming rigs and editing systems. However, even though they belong to the DDR3 RAM category, many RAM modules have different specifications, especially Clock Latency.

Therefore, make sure that you pay attention to these aspects before picking the best DDR3 RAM stick for your computer build. If you have any doubts, we will be happy to answer them in the comments.

4.8/5

Corsair Vengeance Pro DDR3

You may also like

Recommended product
4.8/5
Corsair Vengeance Pro DDR3