Products
Search:
Categories:
All - Popular First
All - Newest First
Platform Modules
Programmers
Other Prop Stuff
PICaxe
Platform Modules
Other PICaxe Stuff
Electronics Design
Sensors
Project Boards
Hobby Kits
Audio
Instruments
Amps
R/C & Robotics
R/C
Robotics
Display
Blinky Lights
Video
Fun
Gaming
Other
Accessories & Tools
Soldering Equipment
Components
Interconnects
IC's
DIP Sockets
Switches
LED's and LCD's
Crystals / Resonators
Power
Parts Packs
Cool Projects
Simple Servo Tester
$14.99
By ModelStation
3 Axis Digital Accelerometer
$7.99
By Rayman
SIDstick
$39.95
By jeffledger
|
Projects
  H-Bridge An upgrade to the L293D, the SN754410 ([url=http://focus.ti.com/lit/ds/symlink/sn754410.pdf]datasheet[/url]) is pin compatible and... 555 Timer A timer/oscillator in a DIP package, the 555 timer ([url=http://focus.ti.com/lit/ds/symlink/tlc555.pdf]datasheet[/url]) is a stand... 64KB EEPROM The Atmel 24C512B is a 64KB (512Kbit) I2C EEPROM compatible with 2.5v to 5.5v logic levels in a nice DIP8 package ([url=http://www... 32KB EEPROM The Microchip 24LC256 is a 32KB (256Kbit) I2C EEPROM compatible with 2.5v to 5.5v logic levels in a nice DIP8 package ([url=http:/... Propeller A very fast microcontroller in an easy-to-use 40 Pin DIP package.
Stats:
* 80Mhz, 160MIPS
* 8 core architecture
* 32KB RAM, ... Battery - 1xAAA This neat AAA battery holder holds a single battery and can also be connected to a protoboard. Here's the [url=http://www.gadgetg... Battery - 9v This is one of the nicer battery snaps - the 'snap' part is made out of solid plastic and won't flex. Power leads are about 8 inc... Battery Box - 4xAA This battery box holds 4xAA batteries in series, so you'll get 6v output with Alkaline batteries, and 4.8v with rechargeable batte... Battery Box - 3xAA This battery box holds 3xAA batteries in series, so you'll get 4.5v output with Alkaline batteries, and 3.6v with rechargeable bat... Shunt Jumper A 2 position jumper block, used to connect 2 pins that are .1" apart. If you've used an IDE drive, you'll know what they look lik... RCA (Phono) Jack This RCA jack is usually used to carry audio or composite video. It can also be used for simple signaling needs. [url=http://www... LED - Bicolor R/G A Nifty Bicolor LED with a 3mm, translucent lens. The legs are spaced .100" apart.
This bicolor LED only needs 2 legs:
To make... LED - Blue Standard Blue LED with a 3mm, clear lens. The legs are spaced .100" apart. Wide, 60 degree viewing angle.
Specs:
* Color: Blu... LED - Green Standard Green LED with a 3mm, slightly diffuse lens. The legs are spaced .100" apart.
Specs:
* Color: Green
* Lens: 3mm, sli... LED - Red Standard red LED with a 3mm, clear lens. The legs are spaced .100" apart.
Specs:
* Color: Red
* Lens: 3mm, clear
* Lead spa... 8MHz Resonator 8 MHz Ceramic Resonator with a +/- .5% accuracy between -20c to 80c. Includes built-in 30pF load capacitors so external capacitors... 16MHz Resonator 16 MHz Ceramic Resonator with a +/- .5% accuracy between -20c to 80c. Includes built-in 30pF load capacitors so external capacito... 32kHz Watch Crystal Standard clock crystal. 32.768kHz frequency is typically used with RTC chips like the DS1307.
This part is available in our [... 25Mhz Crystal A 25Mhz Crystal that comes in a HC49/U-S Package. It's 3.5mm high, and the leads are .2" apart (2.88mm)
This crystal also comes... 5Mhz Crystal A 5Mhz Crystal that comes in a HC49/U-S Package. It's 3.5mm high, and the leads are .2" apart (2.88mm)
This crystal also comes ... 6Mhz Crystal A 6Mhz Crystal that comes in a HC49/U-S Package. It's 3.5mm high, and the leads are .2" apart (2.88mm)
This crystal also comes... Voltage Regulator - 3.3v A basic voltage regulator in a TO-220 package.
[url=http://www.st.com/stonline/books/pdf/docs/2572.pdf]Datasheet[/url]
LD1117V... Voltage Regulator - 5V A basic voltage regulator in a TO-220 package.
[url=http://www.onsemi.com/pub_link/Collateral/MC33269-D.PDF]Datasheet[/url]
MC... NES Controller Socket The easiest way to add a controller to your project, this Controller Socket connects to each pin of an NES controller ([url=http:/... Pin Sockets - Machined Pin 10-pin sockets with .1" spacing that accept IC pins very well and can be cut to size with dikes. Very durable and easy to use ([u... DIP Socket - 40 Pin Using a socket is a lot easier than de-soldering a DIP! This socket has kinked solder tails so when you insert it into your board ... DIP Socket - 8 Pin Using a socket is a lot easier than de-soldering a DIP! This socket has kinked solder tails so when you insert it into your board... Terminal Block 2 Position Molex Low-Profile Terminal Block - uses standard .2" spacing, rated up to 13.5A, 300V. Here's the [url=http://catalog.... Slide Switch A nice SPDT slide switch for controlling power or getting user input. It's what we use for the Propeller Platform. [url=http://ca... Tactile Switch This is a high quality Omron B3F-1000 miniature momentary 4.3mm switch.
Mounts directly into breadboards, rated up to 50mA. P... Analog Joystick A self-centering Analog Joystick with a cap. Note that it does not have a center 'push' button. Here's the [url=http://www.alps.c... Pin Sockets This a 2-pack of pin sockets, a small 4-pin socket and a larger 16-pin socket. Uses standard .1" spacing, and each can be cut to ... Pin Headers - Right Angle 36 Low-Profile Right Angle Gold Plated pin headers in a breakaway strip. They can be trimmed to any size. Pin Headers - Straight A breakaway strip of 40 gold-plated pin headers, spaced .1" apart and can easily be cut to any size. These pin headers are a bit ... Basic Soldering Kit If you're just starting out with electronics, don't buy a big, expensive iron - pick up something simple and inexpensive like this... Dikes Dikes. Snips. Diagonal Cutters. Whatever you call them, they're a necessity when building nearly any electronics project. These di... Desoldering Wick I'm a Solder Sucker kind-of-guy, myself, but Desoldering Wick also has it's place. This 5 Foot spool will fix many mistakes. To ... Solder Sucker The Solder Sucker is a really useful tool for cleaning up mistakes. With one hand, use your iron to heat up the solder you'd like... Soldering Stand This soldering stand includes a wire holder to keep a hot soldering iron away from flesh, fingers, and flammable things, and also ... Soldering Station This is the one I use The Elenco 5-40 has has variable power control (I set it a little less than halfway for lead solder, a littl...Emblems
|
