Want to share a PICaxe-based project on Gadget Gangster, but don't want to worry about the hardware setup? Are you more into software than hardware? This Development Pack includes almost everything to get your project running and a second board to use when building your howto guide. Feel free to use this guide and the photos in it for your guide, too.

This kit includes Potentiometers, extra jumpers, an RCA jack and more.

Kit Contents Include:
* 2 Gadget Gangster Boss Boards
* 20, 2 x 14, and 8 Pin DIP Sockets
* 2x 5k Alps Potentiometers
* 5v Voltage Regulator
* 3.5mm Stereo Jack
* RCA Jack for Audio
* 2x Slide Switches
* 2mm Power Jack
* Reverse Protection Diode
* Extra Jumpers
* Resistors & Caps to get everything running
* Power Indicator LED
* Printed Reference Guide

This kit is an easy way to get everything you need to get started - Pick it up!

You'll need a few tools:
(1) A soldering iron & solder
(2) Diagonal Cutters
(3) Your PICaxe uController and a programming cable. The Boss Board supports works with all PICaxe uControllers except the 40.