Products
Search:
Categories:
All - Popular First
All - Newest First
Platform Modules
Programmers
Other Prop Stuff
PICaxe
Platform Modules
Other PICaxe Stuff
Electronics Design
Sensors
Project Boards
Hobby Kits
Audio
Instruments
Amps
R/C & Robotics
R/C
Robotics
Display
Blinky Lights
Video
Fun
Gaming
Other
Accessories & Tools
Soldering Equipment
Components
Interconnects
IC's
DIP Sockets
Switches
LED's and LCD's
Crystals / Resonators
Power
Parts Packs
Cool Projects
Simple Servo Tester![]()
$14.99
By ModelStation
3 Axis Digital Accelerometer![]()
$7.99
By Rayman
SIDstick![]()
$39.95
By jeffledger
|
USBThumb Propeller Programmer Designer: starlino
Views: 1175
Howto: DocumentationCategory: PropellerProject Forum Emblems:
TestedHas been tested by Gadget Gangster
Difficulty: EasyGreat for builders of all skill levels
(Almost) No Assembly RequiredThis project is mostly pre-assembled
$5 OffCheckout with coupon code thumb for a $5 discount on your order Price: $24.95 USD
Status: In Stock
Description
USBThumb Propeller Programmer can be used to program a Propeller chip. It is pin compatible with Prop Plug.
It can also be used as USB to Serial converter for speeds up to 115200bps. For usage instructions and to download drivers go to starlino.com/usbthumb_propeller_programmer.html USBThumb is a PIC development platform that can be also used for other applications. It comes pre-programmed with a bootloader that allows you upload a new firmware using the USB port and a free bootloader utility. Make It!
Note: The Propeller Programmer comes pre-assembled, you just need to solder on the included pin socket and the USB Jack.
Resources
Binaries
UsbThumbBootloader_UsbThumbSerial_2010-03-15.hex Firmware (Bootloader+UsbThumbSerial) Parts List Possibly Related Projects
Designed by Jon Williams, the Propeller Platform module includes an 80Mhz 8-Core Parallax Propeller … Designed by Jon Williams, the DMX IO Module expands the Propeller Platform or Propeller Platform SD … "...Ready for your next design that needs a little more sauce than the Arduino can offer." - hackada… Parts List (Hide)
USB Type A PlugCategory: Connector Qty: 1 Pin Sockets (Qty per Position)Category: Connector Value: 1 Row Qty: 4 USBThumb PCBCategory: PCB Qty: 1 Cap (E0805)Category: SMT Value: 18 pF Limit: 50V Qty: 2 PIC18F14K50-I/SOCategory: SMT Value: 3.3 V Qty: 1 xtal (6mm x 3.3mm)Category: SMT Value: 12 MHz Limit: 20ppm Qty: 1 V Reg (TSOP-5)Category: SMT Value: 3.3 V Limit: 200mA Qty: 1 Cap (E0805)Category: SMT Value: 0.47 μF Limit: 25V Qty: 1 Cap (E1206)Category: SMT Value: 4.7 μF Limit: 16V Qty: 1 Cap (E0805)Category: SMT Value: 0.1 μF Limit: 25V Qty: 1 Cap (E0805)Category: SMT Value: 1 μF Limit: 16V Qty: 1 Resistor (E0805)Category: SMT Value: 10 kΩ Limit: 1/8W Qty: 1 |

Tested
Difficulty: Easy
(Almost) No Assembly Required
$5 Off
USB Type A Plug
Pin Sockets (Qty per Position)
USBThumb PCB
Cap (E0805)
PIC18F14K50-I/SO
xtal (6mm x 3.3mm)
V Reg (TSOP-5)
Cap (E0805)
Cap (E1206)
Cap (E0805)
Cap (E0805)
Resistor (E0805)